« previous next »
Pages: [1]

Author Topic: Baud rate problem  (Read 8355 times)

Offline Sam8888

  • Jr. Member
  • **
  • Posts: 63
  • BHP: 0
Baud rate problem
« on: November 26, 2016, 01:51:18 pm »
If i change the baudrate on my ecu higher than 19200, the ECU disconnects from VT. :( I can only reconnect if i power cycle the ecu (OFF-ON). This causing me trouble to make a proper triggerlog... Any thoughts what the problem can be?
Notebook is a Toshiba M10 with internal port, so no USB thingy...
Logged
Pages: [1]
« previous next »