News:

When asking for technical help at the very least let us know the version of firmware you are running.
Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html

Main Menu

setting up display-only round

Started by iwbs, August 10, 2016, 08:07:18 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

iwbs

August 10, 2016, 08:07:18 AM Last Edit: August 10, 2016, 08:40:25 AM by iwbs
Hi, I'm trying to set up my display-only round following this guide: http://www.vems.hu/manual/vemstune/help2/htmls/main/aim.html#conf_methods I tried offline method with one serial cable but I got stuck where it says to connect v3 to vemstune, I can't seem to find display menu/round main display dialog/AIM port button anywhere in vemstune v3 menu. firmware 1.2.31, round firmware 1.5.8. Could anyone please help me?

PeepPaadam

#1
August 10, 2016, 05:46:58 PM
You need inverted pinout for it, that is usually the problem.

iwbs

#2
August 10, 2016, 06:16:57 PM
If you mean that short wire which inverts pinouts, then I have it. Bought the round from you and also got this short inverter wire. Uploaded the firmware to round and set up slots for display, but I just can't find this AIM port button to set the proper com port.

iwbs

#3
August 10, 2016, 07:35:45 PM
Looks like I got it all sorted out now, Uploaded firmware 0.5.8 which is AIM compatible unlike 1.5.8
Print
Go Up Pages1
User actions