v3.8 board sec trigger conversion hall>vr type

[sandokan]

greeting,
if you could someone explain the conversion of secondary trigger a hall from the  vr type?

[Kamuto]

greeting,
if you could someone explain the conversion of secondary trigger a hall from the  vr type?

remove solderblob under fets, and make a picture of back board :) will tell what's needed

[sandokan]

[sandokan]

I need it vr type sec trigger

[Kamuto]

so vr or hall?

[sandokan]

I need instructions for vr type

[Kamuto]

connect solderblob under fets and it's ready if you have second lm1815 installed

[sandokan]

I did it and does not work,it is a nissan cas trigger.
sec trigger no readings on the trigger log

[Sam8888]

You have to solder these together.

[sandokan]

I did and it but still secondary trigger does not work

[sandokan]

whether the Nissan rb25 CAS trigger VR or HALL

[Kamuto]

maybe you dont have lm1815 on the other side :)

[Sam8888]

I think Nissan's CAS is a optical sensor.

Here's what i've found:
http://www.vems.hu/wiki/index.php?page=InputTrigger%2FNissanTrigger

[sandokan]

maybe you dont have lm1815 on the other side :)

lm1815 the board can be seen in the picture :)

[sandokan]

I think Nissan's CAS is a optical sensor.

Here's what i've found:
http://www.vems.hu/wiki/index.php?page=InputTrigger%2FNissanTrigger

I know it's optical, just do not know how to set vems to vr or the hall.