Author Topic: AIM on 2nd serial port now supported  (Read 7360 times)

Offline NOTORIOUS VR

  • Full Member
  • ***
  • Posts: 213
  • BHP: 5
AIM on 2nd serial port now supported
« on: July 15, 2016, 03:36:36 pm »
Looks like AIM data stream is now support on the 2nd serial port!

http://www.vems.hu/wiki/index.php?page=BroadcastDatastreamAim

Wonder if that means Port 1 can be used to stream via BT and/or serial connection to laptop simultaneously?

Offline fphil

  • Sr. Member
  • ****
  • Posts: 398
  • BHP: 6
Re: AIM on 2nd serial port now supported
« Reply #1 on: July 16, 2016, 09:21:21 am »
I believe yes since on the contrary there will be no use to support this new stream, although I did not test yet.

Offline gunni

  • Hero Member
  • *****
  • Posts: 1492
  • BHP: 37
Re: AIM on 2nd serial port now supported
« Reply #2 on: July 16, 2016, 11:48:33 am »
I´d rather personally want to see a CAN stream as an addition vs Aim specific stream

Offline Kamuto

  • Hero Member
  • *****
  • Posts: 814
  • BHP: 19
Re: AIM on 2nd serial port now supported
« Reply #3 on: July 16, 2016, 01:50:56 pm »
I´d rather personally want to see a CAN stream as an addition vs Aim specific stream
just wait a little :))
Vems installer in Lithuania
valdas.sunokas@gmail.com

Offline NOTORIOUS VR

  • Full Member
  • ***
  • Posts: 213
  • BHP: 5
Re: AIM on 2nd serial port now supported
« Reply #4 on: July 16, 2016, 06:59:26 pm »
I´d rather personally want to see a CAN stream as an addition vs Aim specific stream

Agree, but at least the 2nd serial isn't wasted on GPS only now.

Offline Matus

  • Jr. Member
  • **
  • Posts: 72
  • BHP: 0
Re: AIM on 2nd serial port now supported
« Reply #5 on: October 03, 2016, 01:03:57 pm »
Nice, this is exactly what I need  however, where I can found 2nd RS232 link on board  ?