Holidays

[fphil]

Do you know if the Vems team is presently on holidays?
I got  a returned ECU which does not work.

[Kamuto]

just call them I got my order sent out maybe that's wiring problem, not ecu? what's wrong with it?

[fphil]

just call them I got my order sent out maybe that's wiring problem, not ecu? what's wrong with it?

I bench tested (I am used to bench test the Genboard for years) the ecu with 1.2.35 July14 that I uploaded: at some point the rpm comes slightly wrong and some conflict appears in the config:  Channel 6 InjGroup becomes Channel 6 I259 per ex.
Next time I power on I got no communication and I am  unable to enter bootloader mode with pin2/3 jumpered as I said to Dave following a Vems report I put.
I may test the Atmega chip with avrdude and for that open the box however I asked Vems for instructions but my request seems to be "silently neglected" for the moment 

[Kamuto]

the problems is 1.2.35  not really good working

[fphil]

I have checked the Atmega from ISP. The chip seems ok. The fw 1.2.35 July14 may have been gardening the chip memory?
I may need to burn a fresh bootloader or in any case instruction 

I have updated my error reporting with the avrdude log.
What else ?

[VEMS]

the problems is 1.2.35  not really good working

Wrong, 1.2.35 has no known problems (but is still under development), 1.2.34 had one BAD version but as pointed out on: http://www.vems.hu/wiki/index.php?page=GenBoard%2FUnderDevelopment%2FFirmwareChanges It was reverted to the 18apr version.

Best regards, Dave

[fphil]

Indeed I was with the fw 1.2.35 July14  not the July19