Primary trigger settings vems BMW e36 M50Turbo

[Jerry]

Hi Help me please.
I need to adjust the offset.
I have a pulley from the engine m52xx .......
He used to set someone?

http://www.rajce.net/f1070131306

http://www.rajce.net/f1070131334

http://www.rajce.net/f1070131330

http://www.rajce.net/f1070131322

[gunni]

The M52 missing tooth is one cylinder pair late on the trigger ring.

So the firing order is 1-5-3-6-2-4

which means that your "no.1" in the ecu will be cylinder 5 or 2. If you adjust the injector and coils in such a way then setup the trigger settings as normal M50 you will have accurate timing

4th tooth after missing
60degrees
Total = 84 degrees before TDC

[Jerry]

How do I set up M52?

TDC after the trigger___?
First trigger tooth___?

It will be functional for the full sequence?

Just swap the first roll with a fifth of the output?

[Jerry]

Or to be setup like this?

TDC after the trigger  84
First trigger tooth 0

And just throw a war in order burning?

[gunni]

TDC after the trigger - 60
first trigger tooth 4

[Jerry]

is it right?


http://www.rajce.net/f1071516380

http://www.rajce.net/f1071516381

[gunni]

make 35 the top one and try, if not then try making 33 the top one