Hi.
What is the status on this?
2015_09_13 version with all ini files updated.
Shows analog multiplexer setup but thats about it, no extra analog channels been selected for gauges or channel inputs.
I also agree with Kamuto, the analogs need addressing so that eventually the free analogs can be used for inputs into strategies.
So you could have Lambda 3-6 , given that the ECU can have two preselected as the internal ones.
Spare temp 1-4
Spare pressure 1-4
Spare switch 1-4
Then in the drop down for each analog input you have
Disabled
Lambda 3
Lambda 4
Lambda 5
Lambda 6
Spare temp 1
Spare temp 2
Spare temp 3
Spare temp 4
Spare pressure 1
Spare pressure 2
Spare pressure 3
Spare pressure 4
Spare switch 1
Spare switch 2
Spare switch 3
Spare switch 4
Then you might want for boost control to use Spare switch 1 as some form of control to change boost targeting
or use Spare pressure 1 as the input for Secondary PWM Y axis
We can skip having Axis curves and would simple allow 1024 as the maximum value for say secondary PWM axis, that should allow usage of most common pressure,temps and lambda values, lambda 0.9 would actually be 90 etc.
And then just have gradients and offsets like the current analogs.
When you have selected Analog 1 to be spare pressure 1 then no other analog can have spare pressure 1 also selected, Vemstune would detect and stop you from burning when there is such an error.
Thats the type of stuff that would put some meaning to Versatile in VEMS.