Vems round and 5volt pressure sensor ?

[mads b (dk)]

Hi

We are trying to connect this https://shop.vems.hu/catalog/honeywell-pressure-sensor-100psi-p-167.html
But we need a 5volt supply. Which pin shall we use ?

Thanks Mads

[mads b (dk)]

No one ? 

[wersch]

There is a 5V supply pin next to the TPS supply

[mads b (dk)]

I'm not sure that we are talking about the same thing

[MWfire]

you can use lambda out if current is low.

[mads b (dk)]

That could be a possibility.... I can see that the typical current is around 20mA

[mads b (dk)]

Is there anyone who knows the max current the lambda output is able to supply?

[wersch]

I'm sorry, my mistake!
I don´t know so much about the round but if you don´t manage to solve an 5v output from the round, there is a 5v regulator in the vems shop.