Author Topic: Weird lambda LSU 4.2 problem  (Read 4083 times)

Offline noshest

  • New Users
  • *
  • Posts: 1
  • BHP: 0
Weird lambda LSU 4.2 problem
« on: March 13, 2016, 08:40:48 am »
Hi, first post from long time lurker  ;D

 I have this weird lambda sensor problem

The sensor won't start, even after heating up, work around is to stop the engine when its warm and restart, then the sensor it works fine
When the engine is cold, its always like this
When the engine is warm, sometimes the sensor starts directly

I have tried at least 3 sensors
Checked all cables
Calibrated it, again and again
All VEMS values seems ok, have compared with others config
Latest VEMS Tune version (tried a lot of versions)
Latest FW(tried a lot of versions)
Hardware is V3.6

Anyone ever heard of something like this?

Could it be VEMS hardware related?

Offline krisb25

  • New Users
  • *
  • Posts: 1
  • BHP: 0
Re: Weird lambda LSU 4.2 problem
« Reply #1 on: April 12, 2016, 09:34:09 pm »
I get the same. generaly it only starts working after engine is warm and I turn the car off and on.  I was wondering if it wasn't warming itself up like it does when you calibrate it.