911 3.2 129+1 trigger random errors

[PeepPaadam]

Hi guys!

Having a slight issue with customers car (car is in Florida). Works fine other than the trigger errors at idle speed or so. Temporary error just at the start of cranking is small thing, but occasionally it shows trigger error (tooth lenth bad) during idle and from the trigger log it seems that secondary trigger (it reads starter gear ring as primary and single teeth on the flywheel as secondary) trigger the primary. Or what it is?

Attached config and triggerlog, would really appreciate any help.

http://www.vems.hu/files/PeepPaadam/Bob_911_3.2.vemscfg
http://www.vems.hu/files/PeepPaadam/v3.3_u012186-2016-03-25-10.50.23_911.triggerlog

[PeepPaadam]

Anyone? I would have to fix the problem soon...  :(

[VEMS]

Hello Peep,

Do you have a local car working with the same HW configuration (and software/config) without this issue ?
From your triggerlog its hard to get any relevant information (because of the high divider count), please take a triggerlog with divider = 1, cranking 8-10 seconds without injection and ignition fuse and upload; I'll review.

Best regards, Dave

[PeepPaadam]

Thanks for the reply Dave. Here's the triggerlog with divider 1: http://www.vems.hu/files/PeepPaadam/v3.3_u012186-2016-04-02-12.59.31_911_3.2_Bob.triggerlog

Not many secondary trigger events there for some reason...