Author Topic: Conflicted channel.  (Read 4280 times)

Offline chencho16000

  • Jr. Member
  • **
  • Posts: 76
  • BHP: 2
  • rally driver
Conflicted channel.
« on: March 23, 2016, 11:08:16 pm »
Hi guys.
My vems has 4 igbt and 4 logic outputs.
Total 8 injector outputs.
4 outputs for use injectors.
And the other two for the solenoid valve control and boost control.
  I wonder where the operating channel is assigned by injector settings or misc. ???
I ask this question because when I assign settings injector by an error, a conflict with the channel appears.
   Can you help me?
Thank you very much.

Offline jrussell

  • VEMS USA
  • Administrator
  • Full Member
  • *****
  • Posts: 224
  • BHP: 15
    • VEMS USA
Re: Conflicted channel.
« Reply #1 on: March 24, 2016, 03:20:59 pm »
Submit a Vems Sharing Center report (Help -> Vems Sharing Center -> Create a new report) and make sure your .vemsconfig is included in the report. Then paste the URL here and we can more easily help you out.

Outputs -> Assign Output Channels should highlight any conflicts you may have and allow you to solve them.
VEMS USA - Located in beautiful Burlington, Vermont
1988 RX7 Turbo