Author Topic: Setting up knock sensors properly?  (Read 4730 times)

Offline Manick

  • Jr. Member
  • **
  • Posts: 38
  • BHP: 2
    • Trionic tuning forum, hosted by yours truly!
Setting up knock sensors properly?
« on: December 21, 2015, 03:12:11 am »
Hey fellows!

I remember back in the days when i fiddled with VEMS in my friends Audi (i5) we had a whole lot of problems trying to figure out how to set the knock sensor up and how to read it properly.

I will be running a V8 with two knocksensors, one placed between 2-3 and one between 6-7.

Any advice regarding this will be helpfull, if there allready is a guide for this that i havnt found, please link me.

Thanks!
Tommy
To boost, or not to boost!
Yea i know i have a lot of questions, sorry.. :)

Offline gunni

  • Hero Member
  • *****
  • Posts: 1492
  • BHP: 37
Re: Setting up knock sensors properly?
« Reply #1 on: December 21, 2015, 08:18:51 am »
What are you having trouble with?

http://vems.hu/vt/help/v3/v3_knock_control.html

Offline Manick

  • Jr. Member
  • **
  • Posts: 38
  • BHP: 2
    • Trionic tuning forum, hosted by yours truly!
Re: Setting up knock sensors properly?
« Reply #2 on: December 21, 2015, 08:25:55 am »
What are you having trouble with?

http://vems.hu/vt/help/v3/v3_knock_control.html

No problem per say, not right now... I was more hoping that this feature had been developed since i last tried to get it to work so you can understand the signals..

I did some more research after my post and found among other the link you sent me, i will also manufacture a knock listener to confirm with so i have everything under control.
To boost, or not to boost!
Yea i know i have a lot of questions, sorry.. :)