Edis-6 coilpack question

[AjRose]

Anyone know how the pinouts go? 1,2,3,4 or 4,3,2,1?
I cant seem to find it online This coilpack is from a v6 mustang I think 2002-2004
Thanks for any help

[[email protected]]

I was hoping that someone would know.

The only way you might hope to find out is to make a table of the resistances up:

Pin 1 to 2 =
Pin 1 to 3 =
Pin 1 to 4 =

Pin 2 to 3 =
Pin 2 to 4 =

Pin 3 to 4 =

And from that you should be able to work out which pin is the common and then work the coils back from there

[hilly]

Have a look here near the bottom of the page, there is a diagram with the 6 cyl coil pack connector on it.
http://www.bgsoflex.com/mjl/mjl_edis_summary.html

Hilly

[AjRose]

Thanks I have seen that picture before.

I am not sure of the pinouts on this exact coilpack is the problem I may as well take a guess it was only $20usd

I'll probably actually just buy a msd setup  :-\

[[email protected]]

Did you try measuring the resistances?
Write them down, put them up here and we'll at least have a stab at the pin outs.

[hilly]

It is the top set of numbers on you picture, ie 1 on the left, 4 on the right

Hilly

[AjRose]

Cool Thank you