I'm trying to diagnose a problem with my fuel pump output. When you turn on the key the fuel pump runs through its 2 second priming pulse, then I hear the relay click off for a split second and then the pump runs for another 2 seconds. sometimes this cycle repeats 5-10 times. Sometimes not at all. I suspected false triggers on my hall sensor tricking the ecu into thinking the engine is cranking. but I can't confirm this. The rpm gauge in VEMSTune never moves. There is no rpm signal in the datalogs.
Here is my current setup:
vemstune version from 3/08/2010
firmware 1.70
36-1 tooth wheel
hall sensor Hamlin Electronics. (maybe too sensitive?)
4 cylinder engine running wasted spark coil packs.
Thanks guys. I'm making great progress here with your help.