need a low dwell time 4 cyl external coil pack

[jrtuning_ben]

following on from this discussion on sxoc

http://www.sxoc.com/vbb/showthread.php?t=266662

if i understand it right i need a low dwell time coil pack. as said by bob ford ones are no good.

how are the subaru ones?

or has anyone any other ideas/experience?

[rob@vems.co.uk]

The quickest charging coils that I've come across are the ones found on the Mitsubishi EVO4 with a usable spark at 2.3 to 2.5ms

The Driftworks coil packs are there to overcome the problems with the Coil on plugs.

You're not looking to replace the COPs just to drive them differently...

[jrtuning_ben]

i was hoping to start with to replace the coil on plug

then replace the driving system as well, but cant afford to change ecu and stuff yet as ive just got a new map for my current ecu (std)

[dnb]

I have had good success with 034 Motorsport coils on the TVR.  I'm using a dwell of 2.5ms.  No idea what dwell the Subaru coils like to run at, although I do have a pile of them sat in the corner...

[jrtuning_ben]

is there any way of measuring it?

[jrtuning_ben]

found this mitsubishi one http://cgi.ebay.com/ebaymotors/MSD-High-Performance-HEI-Coil-94-02-Mitsubishi-Neon_W0QQcmdZViewItemQQcategoryZ33689QQihZ018QQitemZ280076241803QQrdZ1QQsspagenameZWDVW

[damo_S13]

ok im looking for a coil pack to use on my 200sx for waste spark

is this any good?

http://cgi.ebay.com/ebaymotors/MSD-Ford-Coil-Pack-4-Tower-PN-8241_W0QQcmdZViewItemQQcategoryZ33689QQihZ005QQitemZ150202062893QQrdZ1QQsspagenameZWDVW

thanks
damo

[rob@vems.co.uk]

That one is perfect, if you're buying it get a second one and I'll buy it off you - at that price it would be daft to not use one on my SR20DE.

Getting a suitable connector for the coils might be tricky though.

[hilly]

The connector on that looks like the one used on the Ford EDIS coil pack, your local scrapy would then be a good place for a connector.

Hilly

[rob@vems.co.uk]

Yeah its an EDIS coilpack, and the newer Fords will have the connector... I just want a clean new one if I can get it!

[jrtuning_ben]

was talking to damo on msn last night and i also want one lol so thats three we need to order

[rob@vems.co.uk]

Ben,

I dunno if your ECU has the ignition drivers in it, PM me with the serial number and what have you and I'll see what I can find out about it.

[jrtuning_ben]

will do when i pick it up its at angelworks at the minute i think or en route to angelworks.

[rob@vems.co.uk]

okay...

Can you PM me with details who its from?

Rob

[damo_S13]

ok ben is going to get in touch with them tomorrow for us rob