VR6 trigger w/ multi tooth (MK4) cam/gear?

[NOTORIOUS VR]

Wondering if someone would be able to help me out with setting up the sec. trigger correctly.

12V VR6 w/ MK4 cams... so this means not the simple 1 window cam.

it has this:



Attached is a trigger log I took (although I do believe that there was an issue with the primary trigger - car ran but was kinda weird and didn't want to start right off the bat without a few pops - this has been corrected now by the installer/shop)

https://dl.dropboxusercontent.com/u/56237915/v3.3_u011107-2015-11-12-19.48.23.triggerlog

Thanks!

[Kamuto]

set secondary trigger to rising edge and make trigger log, then it should be different, and you will be able to use sec ignore options