News:

When asking for technical help at the very least let us know the version of firmware you are running.
Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html

Main Menu

How to connect external FET to stepper/p259??

Started by smurfinator, January 16, 2017, 03:43:23 PM

Previous topic - Next topic

smurfinator

Suggest sticky for this topic.  Is there a diagram somewhere showing how to drive an external FET for higher current duty than the stepper and p259 allow?  This is for safety with my ISV currently (pun!) on the stepper.  I am running full sequential V8 and have no extra FET.
Audi ABZ 4.2 V8 in 1993 90 quattro
TTV 60-2 flywheel and cam sync
firmware: 1.2.20

Smurf blue (BMW Laguna Seca), hence the name!

smurfinator

Or can I just put fets inside on ec18 pins 6 and 12? Still suggest sticky for others to build this hack :)
Audi ABZ 4.2 V8 in 1993 90 quattro
TTV 60-2 flywheel and cam sync
firmware: 1.2.20

Smurf blue (BMW Laguna Seca), hence the name!

wersch