Author Topic: Analog input voltage "need invert"  (Read 4632 times)

Offline nevaeh speed

  • Jr. Member
  • **
  • Posts: 9
  • BHP: 0
Analog input voltage "need invert"
« on: January 12, 2016, 05:13:04 am »
when using the wizard it won't allow me to invert the voltage readings. Basically I have .35 volts for a value of 100 and 1.79 volts for a value of 0. But nothing seems to work. This is just an example. Is there a way to manually input the curve like a plot/graph? Or is there a way to fix this?

Offline nevaeh speed

  • Jr. Member
  • **
  • Posts: 9
  • BHP: 0
Re: Analog input voltage "need invert"
« Reply #1 on: January 16, 2016, 05:28:26 pm »
This would be a nice feature on all analog inputs.



Offline Sprocket

  • Hero Member
  • *****
  • Posts: 867
  • BHP: 29
Re: Analog input voltage "need invert"
« Reply #2 on: January 16, 2016, 08:18:35 pm »
Custom curve already exists........

Offline nevaeh speed

  • Jr. Member
  • **
  • Posts: 9
  • BHP: 0
Re: Analog input voltage "need invert"
« Reply #3 on: January 18, 2016, 06:35:34 pm »
You are right, but only one of them that I know of for analog inputs. And I'm already using that for oil temperature. So is there another?