Author Topic: VEMS ecu modification for 3rd trigger (Read 6343 times)

Wolf_Tm · « **on:** November 12, 2015, 02:04:02 pm »

Hi,
I'd like to make a customer's VEMS to drive a 2nd camshaft VVT, so needing to read a 2nd cam position VR sensor (aka 3rd trigger) and I've been told it will need an hardware modification at the factory.
We mailed to vems.hu last week but got no reply so far, so any idea how to get this modification done?
Thanks

Kamuto · « **Reply #1 on:** November 12, 2015, 10:40:29 pm »

you just need vr-hall converter and some small adjustments in ecu hardware depending on ecu version

Wolf_Tm · « **Reply #2 on:** November 13, 2015, 06:30:50 pm »

Quote from: Kamuto on November 12, 2015, 10:40:29 pm

you just need vr-hall converter and some small adjustments in ecu hardware depending on ecu version

Kamuto, please let's get deeper into details.
What vr-hall converter did you use with success?
And what about the ecu hardware adjustments? Is something easy or would you need the ecu there?
Thanks

Denmark · « **Reply #3 on:** November 13, 2015, 06:54:59 pm »

Vr to Hall converter

From vemsshop would be a good start

Wolf_Tm · « **Reply #4 on:** November 13, 2015, 06:57:21 pm »

Quote from: Denmark on November 13, 2015, 06:54:59 pm

Vr to Hall converter

From vemsshop would be a good start

Definitely!

Thanks

News:

Author Topic: VEMS ecu modification for 3rd trigger (Read 6343 times)

Wolf_Tm

VEMS ecu modification for 3rd trigger

Kamuto

Re: VEMS ecu modification for 3rd trigger

Wolf_Tm

Re: VEMS ecu modification for 3rd trigger

Denmark

Re: VEMS ecu modification for 3rd trigger

Wolf_Tm

Re: VEMS ecu modification for 3rd trigger