The burble of life...

[irishtwincam]

As of about 10am this morning a Wild Cammed, Quad Throttle, High Compression 4age came to life for a brief few seconds powered by VEMS

:D

Cheers to Bob for the tech support.

For those who find their coils are always firing out of sequence...
Read the Settings->Ignition Outputs dialog box.
Outputs are traversed in REVERSE order.

Put coil two at the top, coil one  under it :D
Intuition would tell many to list coil 1 first I suspect...

More updates to come....

[BenR]

Sounds good!
Whats the engine spec?

[irishtwincam]

From the piston up...

Wiseco pistons, 82mm 30.68mm compression height, 5.9.cc+ dome volume, 20mm x 60mm wrist pin (from specs page)
RM Sport Head with TRD valves. According to Richard it should make > 200hp with the cams in it.
11mm lift I think, cant remember duration.
I'm hella tired. OH, and ARP bolts throughout.

I have photos of the head, intake, exhaust ports, combustion chamber etc.
Didnt have long when I was at the workshop to ask about the theorys and specifications.
I was playing taxi to my brother who was building the car and had to fly back to Ireland that evening.

EDIT: WE'VE been supporting this vems install for the past 2-3 nights i a row over the phone (winces at the phone bill).
Many thanks to bob for his time and help here. And Viva Skype for VOIP calls :D
Havent hadtime to host photos and share with everyone.
When all is said and done I'll do a projects thread.

Needless to say I have some requirements for the VEMS UNIX heads who've been ignoring the GUI!!!  >:( >:( >:(

I might be over at yours to help Paz through his head swap in 2 weeks ;D
I'll chat to you then :D

For now, Im off to some well earned sleep....

[BenR]

Nice one!

Hopefully i'll see you at mine, that would be brill.

[[email protected]]

Been supporting this vems install for the past 2-3 nights i a row over the phone (winces at the bill).

We've been supporting this install surely :P

[irishtwincam]