Dark Blue/Red 0.5mm2 TEMP GND
White/Dark Blue 0.5mm2 WATER TEMP
Yellow/Dark Blue 0.5mm2 AIR TEMP
Violet/Yellow 0.5mm2 AIRCON REQUEST
Yellow 0.5mm2 TURBO TIMER RELAY
White 0.5mm2 TURBO TIMER INPUT
Dark Green/Dark Blue 0.5mm2 TPOS SIGNAL
Red/Dark Blue 0.5mm2 TPOS +5V
Dark Blue 0.5mm2 EXTERNAL MAP SENSOR
Brown 0.5mm2 OXYGEN SIGNAL
Red/White 0.85mm2 BOOST CONTROL
Yellow/White 0.85mm2 TRIG 2
Dark Green/White 0.85mm2 FAN RELAY
White 0.85mm2 FUEL RELAY
Brown/Black 0.85mm2 STAGED INJ
Dark Green/Black 0.85mm2 INJECTOR 1
Dark Blue/Black 0.85mm2 INJECTOR 2
Yellow/Black 0.85mm2 INJECTOR 3
White/Black 0.85mm2 INJECTOR 4
orange/black 0.85mm2 INJECTOR 5
purple/black 0.85mm2 INJECTOR 6
Black 0.85mm2 SIGNAL GND
Gray/Tan 0.85mm2 IDLE AIR
Green/Blue 0.85mm2 WIDEBAND OXY GROUND
Tan/Black 0.85mm2 AUX 1 INPUT/OUTPUT
Orange/Dark Blue 0.85mm2 AUX 2 INPUT OUTPUT
cant get the 0.85mm2 so i change that to 1 mm2
Red/White 1.25mm2 +12V IN
Black/White 1.25mm2 GND
Blue/Green 4 core shielded TRIGGER GND
Brown/White 4 core shielded TRIGGER IN 1
Red/Yellow 4 core shielded TRIGGER +5V
Violet 8 core shielded TACH OUTPUT
Dark Green 8 core shielded IGNITION 1
dark blue 8 core shielded IGNITION 2
yellow 8 core shielded IGNITION 3
white 8 core shielded IGNITION 4
orange 8 core shielded IGNITION 5
purple 8 core shielded IGNITION 6
Black/Shield 8 core shielded IGNITION GND
going to make my own shielding using this stuff
http://www.techflex.nl/metaalshielding-metal-braid-c-146_81.htmlneed to know if i need to shield the coilwiring per coil or if i can bundle them in one shield
(im using dumb cop coils)
let me know if i forgot anything (dont have knock sensors but i do have one egt , will use the wiringcolours on the sensor as a guide)