Feature Request - ON/OFF VVT mapping under camshaft control?

[NOTORIOUS VR]

Dave,

I'm thinking it would be nice to be able to more accurately map even on/off style VVT by using the actual Camshaft Control tables under Motorsports group... but with a simple option of 0 and 1 (off and on) in the MAP/RPM table, and a non PWM option in the setup page.

Right now using Misc 1 to control VANOS is just ok, but being able to map VANOS more like a stock ECU would be much, much better obviously.

Could this be brought to the attention of the guys? :)

[NOTORIOUS VR]

Oh well, added to the WIKI see if it gains any traction there.

[Sprockets]

Just an idea, if you're only controlling 1 cam and using no feedback, you could use the secondary PWM output, and use 100% and 0% as the entries.

Regards

-Gavin

[NOTORIOUS VR]

Just an idea, if you're only controlling 1 cam and using no feedback, you could use the secondary PWM output, and use 100% and 0% as the entries.

Regards

-Gavin

Not a bad idea, although with only one PWM out table if you're already using that for something else you're stuck again :P