« previous next »
Pages: [1]

Author Topic: Audi AAN: MAT sensor pullup  (Read 6279 times)

Offline iwbs

  • Jr. Member
  • **
  • Posts: 34
  • BHP: 1
Audi AAN: MAT sensor pullup
« on: July 07, 2015, 12:43:07 pm »
Hi, I took my v3 out of case, to install camHALL inverter. Thought I could mind as well install 2k7 pullup for NTC type MAT sensor, which is required by the vems homepage. Does anyone know, where its located on v3.8 schematics or how its signed? Thanks for any help!
Logged

Offline PeepPaadam

  • Sr. Member
  • ****
  • Posts: 250
  • BHP: 8
Re: Audi AAN: MAT sensor pullup
« Reply #1 on: July 07, 2015, 06:14:07 pm »
You don't need to install any other pullup, your VEMS will work perfectly with NTC sensor just like it is at them moment.
Logged

Offline iwbs

  • Jr. Member
  • **
  • Posts: 34
  • BHP: 1
Re: Audi AAN: MAT sensor pullup
« Reply #2 on: July 07, 2015, 09:23:35 pm »
Okay, one strange thing I noticed while crancking long enough and many times in a row, IAT started to climb up suddenly for no reason.  From 20°C up to 45°C and then slowly fell back. Uploaded 2252-256 patch, but nothing changed. Any guesses?
« Last Edit: July 08, 2015, 05:26:19 am by iwbs »
Logged

Offline iwbs

  • Jr. Member
  • **
  • Posts: 34
  • BHP: 1
Re: Audi AAN: MAT sensor pullup
« Reply #3 on: July 11, 2015, 09:50:44 am »
This problem doesn't seem to occur anymore, after the car has started. IAT stays around 20-25°C
Logged

Offline Kamuto

  • Hero Member
  • *****
  • Posts: 814
  • BHP: 19
Re: Audi AAN: MAT sensor pullup
« Reply #4 on: July 12, 2015, 11:14:02 am »
it was just backfire heat in the intake
Logged
Vems installer in Lithuania
valdas.sunokas@gmail.com

Offline iwbs

  • Jr. Member
  • **
  • Posts: 34
  • BHP: 1
Re: Audi AAN: MAT sensor pullup
« Reply #5 on: July 20, 2015, 10:54:53 am »
Makes sense. Cheers!
Logged
Pages: [1]
« previous next »