Technical > Wiring & Sensors

I need PINS for vems 3.2 COnenctors?

(1/1)

turborabbit77:
I am located in the US.. I bought a used VEMS ecu version 3.2,,  Iam putting it ona  audi v8 with sequential injection..  I need some more pins so I can remake the harness from scratch.. Can anyone tell me what type of pins are used for the VEMS ECU connector or if there is anyone in the US that sells them online..

I also need the hose that connects onto the map sensor.. rubbing turbing with the screw fitting..
Any idea where i can buy this stuff let me know..it takes to long to get from teh UK so i didnt know if you just use standard pins or what..  ALot of the US ECU's use standard GM weatherpack pins. 

rob@vems.co.uk:
They are AMP econoseal plugs, I'm not sure where you'd get them in the US to be honest.  There are guys in the US selling VEMS try jason@6speed.com

turborabbit77:
Jason@6speed is not a valid email address

Navigation

[0] Message Index