Possible to ignore secondary trigger less than x Primary trigger? 4AGE 20V

[Grant]

Hi Guys,

Not too long ago I updated from a firmware several years old w/megatune to Vemstune with current firmware. 

I have a triggering issue I never used to have "Less PTrigger" which looks to be caused because I'm getting a false secondary trigger event.  My setup is Cam-Sync 24+1 Toyota cam mounted sensor.  I should be seeing the 24 P teeth for every 1 secondary trigger.  This issue only happens when the idle is below 1100 rpm and the CAS gets hot.   



I looked at some of the special secondary trigger options but couldn't identify anything that would let me set a minimum thresh hold.  you can see form the image that if I could ignore the S trigger at the 12 tooth mark I would be OK.

If not I will grind a tooth off of the 24 wheel and make it 24-1. 

Thanks in advance guys. 

Grant