A little help with the config files please

[Sprocket]

Which bit of the tables.txt file is the ignition map?

Im looking to lift the majority of the ignition map from the 1400 tables.txt and splice it into the tables.txt for the K1275RS. Im not sure which bit is which, lol

j, l or n??


j[0]=4B80 4680 4180 3C80 3C80 0A80 0A80 0A80 0A80 0A80 0A80 0A80
j[1]=4680 3280 3280 3480 3480 3480 3580 3880 3A80 3A80 3A80 3680
j[2]=4180 3280 3280 3480 3480 3780 3780 3880 3A80 3A80 3A80 3880
j[3]=3C80 3280 3280 3480 3780 3780 3780 3880 3A80 3C80 3C80 3A80
j[4]=3780 3580 3580 3580 3780 3780 3780 3A80 3C80 3C80 3C80 3A80
j[5]=3780 3780 3780 3780 3780 3880 3C80 3C80 3C80 3D80 3C80 3A80
j[6]=3780 3780 3980 3980 3A80 3C80 3C80 3C80 3C80 3D80 3D80 3C80
j[7]=3780 3880 3980 3A80 3A80 3C80 3C80 3C80 3C80 3D80 3D80 3C80
j[8]=3780 3880 3980 3A80 3A80 3C80 3C80 3C80 3C80 3D80 3D80 3C80
j[9]=0080 3880 3980 3A80 3A80 3C80 3C80 3C80 3C80 3D80 3D80 3C80
j[A]=0080 3880 3980 3A80 3A80 3C80 3C80 3C80 3C80 3D80 3D80 3D80
j[B.]=0080 3880 3980 3A80 3A80 3C80 3C80 3C80 3C80 3D80 3D80 3D80
l[0]=63 55 48 3D 37 37 37 37 37 37 37 37
l[1]=55 37 37 36 36 37 37 37 37 37 37 37
l[2]=48 37 37 36 36 37 37 37 37 37 37 37
l[3]=3D 37 37 37 37 37 37 37 37 37 37 37
l[4]=37 37 37 37 37 37 37 37 37 37 37 37
l[5]=37 37 37 37 3D 3D 3D 3D 3D 3D 3D 3D
l[6]=3D 3D 3D 3D 47 47 47 47 47 47 47 47
l[7]=47 47 47 47 47 4F 4F 4F 4F 4F 4F 4F
l[8]=4F 4F 4F 4F 4F 4F 5C 5C 5C 5C 5C 5C
l[9]=5C 5C 5C 5C 5C 5C 5C 63 63 63 63 63
l[A]=63 63 63 63 63 63 63 63 63 63 63 63
l[B.]=63 63 63 63 63 63 63 63 63 63 63 63
n[0]=78 78 50 87 A0 B4 B4 B4 B4 B4 B4 B4
n[1]=78 3C 44 88 A0 B1 B2 B1 B1 B1 B1 B1
n[2]=78 3C 60 87 9B AA AB A9 A9 A9 A9 A9
n[3]=50 3C 60 86 98 A1 A2 A1 A1 A1 A1 A1
n[4]=50 3C 5C 85 8D 99 9B 9A 9A 9A 9A 9A
n[5]=50 3C 58 77 83 8E 8F 8F 8F 8F 8F 8F
n[6]=3C 3C 58 6F 7A 81 83 84 84 84 84 84
n[7]=3C 3C 58 67 6F 78 78 78 78 78 78 78
n[8]=3C 3C 50 5F 6F 78 78 78 78 78 78 78
n[9]=3C 3C 50 5F 6F 78 78 78 78 78 78 78
n[A]=3C 3C 50 5F 6F 78 78 7C 7C 7C 7C 7C
n[B.]=3C 3C 50 5F 6F 78 78 7C 7C 7C 80 80
k[0]=0A 13 1E 2D 32 3C 41 46 50 55 5A 64
r[0]=07 09 10 16 1C 22 28 2E 34 3A 40 46
h[0]=01 02 04 08 10 20 40 80
h[1]=00 00 00 00 00 00 00 00
h[2]=30 20 00 00 00 00 00 00
b[0]=28 30 38 40 48 50 58 60 FF FF FF BC
t[0]=21 40 60 80 A0 C0 E0 FF

[rob@vems.co.uk]

Believe its I

[Sprockets]

Afraid not Rob

from the wiki:

In short:

j[] table percentage of req_fuel, 100 means req_fuel, 255 means 2.55*req_fuel
l[] table lambdacorr factor (most useful range is 56..120), 1/target_lambda:
decimal 56 means (200+56)/256 = * 1.0 (lambda = 1.0 as well)
0 means (200+0)/256 = * 200/256 = 0.78 (lambda=1.25 extremely lean)
decimal 255 means (200+255)/256 = 455/256 (stupid rich, not sane for gasoline)
n[] table ignadv in 0.25 crankdegrees (unless numberformat=real, in which case it is 1 crankdee, and fractions are allowed)
h[] table GenBoard/Manual/Config/HwMap
Don't forget to convert decimal numbers to hex, unless you use numberformat=10 in tables.txt (in that case you can write decimal).



Hope that helps ya

-Gavin

[rob@vems.co.uk]

You're right, should have looked it up rather than relied on an increasingly poor memory:-[

[Sprocket]

thanks