« previous next »
Pages: [1]

Author Topic: Tachometer signal  (Read 6528 times)

Offline Mark0

  • Jr. Member
  • **
  • Posts: 24
  • BHP: 0
Tachometer signal
« on: March 25, 2015, 08:14:44 pm »
Right now using AutoGauge aftermarket tachometer which works and shows current engine RPM. But in other hand, on car cluster it doesn't work.

Using P259 channel 0 divider 16
Maybe 1k ohm 1/4 watt pull up resistor would help
Logged
Random VEMS user :O

Offline MWfire

  • Hero Member
  • *****
  • Posts: 721
  • BHP: 35
Re: Tachometer signal
« Reply #1 on: March 25, 2015, 11:26:36 pm »
Old car?
Some old cluster needs more than 50V to trigger. That you can solve with
https://shop.vems.hu/catalog/inductor-p-102.html
Logged

Offline Mark0

  • Jr. Member
  • **
  • Posts: 24
  • BHP: 0
Re: Tachometer signal
« Reply #2 on: March 26, 2015, 10:15:02 am »
Mhmm, not old. Audi S4 2001 bi-turbo
Logged
Random VEMS user :O

Offline MWfire

  • Hero Member
  • *****
  • Posts: 721
  • BHP: 35
Re: Tachometer signal
« Reply #3 on: March 27, 2015, 02:40:06 pm »
Then it should works if that car hasn't signal from canbus.
Logged

Offline astit

  • New Users
  • *
  • Posts: 1
  • BHP: 0
Re: Tachometer signal
« Reply #4 on: May 22, 2015, 12:33:57 pm »
I'm using too an aftermarket tachometer on an A4 2002 and works like a charm. I can't figure out why it's not working a yours.
Logged

Offline Mark0

  • Jr. Member
  • **
  • Posts: 24
  • BHP: 0
Re: Tachometer signal
« Reply #5 on: June 01, 2015, 04:34:35 pm »
Aftermarket one works fine, but on cluster not. And yes, RPM signal via canbus.
Logged
Random VEMS user :O

Offline Kamuto

  • Hero Member
  • *****
  • Posts: 814
  • BHP: 19
Re: Tachometer signal
« Reply #6 on: June 02, 2015, 12:37:51 am »
Quote from: Mark0 on June 01, 2015, 04:34:35 pm
Aftermarket one works fine, but on cluster not. And yes, RPM signal via canbus.

so that means it wont work :)
Logged
Vems installer in Lithuania
valdas.sunokas@gmail.com
Pages: [1]
« previous next »