News:

When asking for technical help at the very least let us know the version of firmware you are running.
Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html

Main Menu

Vems knock ec18 pinouts

Started by lost, January 22, 2015, 08:44:25 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

lost

January 22, 2015, 08:44:25 PM
Hello, i have vems v3.5 (it should be same as 3.3) and want to connect knock chip with wires to ec 18 pin 1-2-3

I have noticed that i have some smd components near ec18 pins that v3.6 does not have installed.
and 3.6 has some components that i dont have. Is it possible to burn somethin if in that place is analog IN ?


Print
Go Up Pages1
User actions