« previous next »
Pages: [1]

Author Topic: Porsche 944 Turbo, no secondary VR trigger  (Read 6596 times)

Offline PeepPaadam

  • Sr. Member
  • ****
  • Posts: 250
  • BHP: 8
Porsche 944 Turbo, no secondary VR trigger
« on: January 19, 2015, 03:45:51 pm »
I have a problem with VEMS not seeing 2nd VR signal, hoping perhaps here would get faster reply.

All the info is here: http://www.vems.hu/wiki/index.php?page=MembersPage%2FPeepPaadam%2FPorscheNineFourFourTurboPnP

Tried switching polarity, nothing. Secondary VR assembled per instructions.

Do you guys have any idea?

TIA!
Logged

Offline MWfire

  • Hero Member
  • *****
  • Posts: 721
  • BHP: 35
Re: Porsche 944 Turbo, no secondary VR trigger
« Reply #1 on: January 19, 2015, 04:10:44 pm »
Did you add secondary lm?
Did you connect input to jp 20?
http://www.vems.hu/files/genboardv3/v3.3/v33_top.pdf

Is pin 13 on big connector disconnected(as should be)?
Logged

Offline Kamuto

  • Hero Member
  • *****
  • Posts: 814
  • BHP: 19
Re: Porsche 944 Turbo, no secondary VR trigger
« Reply #2 on: January 19, 2015, 04:16:00 pm »
did you put 10 k resistor on second lm output? it needs to be near that secondary trigger bridge
Logged
Vems installer in Lithuania
valdas.sunokas@gmail.com

Offline Kamuto

  • Hero Member
  • *****
  • Posts: 814
  • BHP: 19
Re: Porsche 944 Turbo, no secondary VR trigger
« Reply #3 on: January 19, 2015, 04:21:01 pm »

in that black circle ;)
Logged
Vems installer in Lithuania
valdas.sunokas@gmail.com

Offline PeepPaadam

  • Sr. Member
  • ****
  • Posts: 250
  • BHP: 8
Re: Porsche 944 Turbo, no secondary VR trigger
« Reply #4 on: January 19, 2015, 05:30:22 pm »
Thanks Kamuto, that was missing!

Regarding others, I did not state the obvious lol :D And in wiki link there is photos of my board, all the top side components are visible and ok.

I will test it right away!
Logged

Offline Kamuto

  • Hero Member
  • *****
  • Posts: 814
  • BHP: 19
Re: Porsche 944 Turbo, no secondary VR trigger
« Reply #5 on: January 19, 2015, 05:31:50 pm »
Quote from: PeepPaadam on January 19, 2015, 05:30:22 pm
Thanks Kamuto, that was missing!

Regarding others, I did not state the obvious lol :D And in wiki link there is photos of my board, all the top side components are visible and ok.

I will test it right away!
it should work I think :D
Logged
Vems installer in Lithuania
valdas.sunokas@gmail.com

Offline PeepPaadam

  • Sr. Member
  • ****
  • Posts: 250
  • BHP: 8
Re: Porsche 944 Turbo, no secondary VR trigger
« Reply #6 on: January 20, 2015, 02:12:38 pm »
Tested it with sound card, I used C130 since I don't have 3rd trigger and there is no special configuration in the Play Trigger menu for Porsche trigger. Even though it displayed 2x less rpm, there were no trigger errors etc.

On Friday I can test it on real 944 Turbo again, hope it will work fine :)
Logged
Pages: [1]
« previous next »