Problem with V3 data, only peak values shown.

[gunni]

I'm using 1.2.30 on the ECU and latest round code and running AIM protocol.

Whatever is the peak value from the ECU will stay on the round until everything is powered off, anybody seen this before?

[VEMS]

Hello Gunni,

Most likely peak-hold mode is active on some (or all) of the slots, see: http://vems.hu/vt/help/round/round_display_peak_hold_settings.html

Best regards, Dave

[gunni]

This doesn´t come up as an option

I´m using VT 1.5.29

[VEMS]

What firmware version are you running in your round ?

[gunni]

It was the latest available for AIM

[VEMS]

That would be 0.5.8 firmware, please confirm. Make sure to run ini update from VemsTune -> Preferences -> Update ini files from web to update your Vemstune installation with ini files matching the newer firmwares. After that the option should be available in Display -> Display Peak Hold Setting.

Best regards, Dave

[Wolf_Tm]

Same happened to me:

http://www.vemssupport.com/forum/index.php/topic,2338.0.html