Author Topic: no spark issue-subaru  (Read 5422 times)

Offline shark_22

  • Jr. Member
  • **
  • Posts: 29
  • BHP: 0
no spark issue-subaru
« on: August 30, 2014, 12:01:38 am »
 Hi, Im gonna post this here instead of the triger section,but all the information are there:
http://www.vemssupport.com/forum/index.php/topic,2343.0.html

I just install my vems v3.6 in my Subaru h6 avcs-vvl ez30r

Everything look find but i dont have any spark

On each coil i got 12v,gnd, and all the signal wire have continuity to the econoseal

I want to know if the vems is supossed to supply 5v by the ignition output(signal)
I got continuity with all my ignition output and the negative

When I test it i only got 0,2v between the signal and the ground on coil

So if somebody know whats happening, it would be appreciate!

thanks!

jerome

Offline VEMS

  • Administrator
  • Sr. Member
  • *****
  • Posts: 487
  • BHP: 22
Re: no spark issue-subaru
« Reply #1 on: August 31, 2014, 05:58:24 pm »
Hello Jerome,

I provided some hints in your original thread here: http://www.vemssupport.com/forum/index.php/topic,2343.0.html

Best regards, Dave