« previous next »
Pages: 1 [2]

Author Topic: 100-1 Flywheel and cam question  (Read 19997 times)

Offline PeepPaadam

  • Sr. Member
  • ****
  • Posts: 250
  • BHP: 8
Re: 100-1 Flywheel and cam quetion
« Reply #15 on: September 08, 2007, 02:23:50 pm »
One more thing: if cam pulse does not take place between mentioned cylinders, you can rotate the firing sequence in ignition output table until it's right instead of machining/welding etc.

I agree with Rob: start the car with wasted spark and then go sequential.
Logged

Offline BrendanC

  • Jr. Member
  • **
  • Posts: 18
  • BHP: 0
Re: 100-1 Flywheel and cam question
« Reply #16 on: September 08, 2007, 03:58:02 pm »
Ah, okay. I would guess I have to make sure I appropriate that in the loom order?
Logged

Offline PeepPaadam

  • Sr. Member
  • ****
  • Posts: 250
  • BHP: 8
Re: 100-1 Flywheel and cam question
« Reply #17 on: September 08, 2007, 05:25:53 pm »
No-no, you can change it in MegaTune.
Logged
Pages: 1 [2]
« previous next »