News:

When asking for technical help at the very least let us know the version of firmware you are running.
Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html

Main Menu

fan control

Started by Seight-v8, May 31, 2014, 09:18:14 AM

Previous topic - Next topic

Seight-v8

Hello all,

Been thinking of some small upgrades to my car/engine.....

I am sure I seen fan cooling fan control in the settings somewhere....

Can this be done so that the fan runs on after the engine has been turned off.....say 2-3mins.....or does need more than the ecu can do?

Cheer

Scott
Engine:Rover V8 4600cc
Vems Firmware:V1.2.38, GPS, SDcard, LCD & Dual lambdas, Wasted spark, 36-1 trigger, Cam Sync & Bluetooth serial.

http://www.vems.hu/wiki/index.php?page=MembersPage%2FScottRichmond

mads b (dk)

You need power to ecu if you want it to control anything ;-)
Vw beach buggy 1.6 VNT turbo, Vems 3.1 no. 57