Author Topic: fan control  (Read 6274 times)

Offline Seight-v8

  • Sr. Member
  • ****
  • Posts: 339
  • BHP: 6
    • Members Page - Scott Richmond
fan control
« on: May 31, 2014, 09:18:14 am »
Hello all,

Been thinking of some small upgrades to my car/engine.....

I am sure I seen fan cooling fan control in the settings somewhere....

Can this be done so that the fan runs on after the engine has been turned off.....say 2-3mins.....or does need more than the ecu can do?

Cheer

Scott
Engine:Rover V8 4600cc
Vems Firmware:V1.2.38, GPS, SDcard, LCD & Dual lambdas, Wasted spark, 36-1 trigger, Cam Sync & Bluetooth serial.

http://www.vems.hu/wiki/index.php?page=MembersPage%2FScottRichmond

Offline mads b (dk)

  • Full Member
  • ***
  • Posts: 125
  • BHP: 4
Re: fan control
« Reply #1 on: May 31, 2014, 11:00:44 am »
You need power to ecu if you want it to control anything ;-)
Vw beach buggy 1.6 VNT turbo, Vems 3.1 no. 57

Offline NOTORIOUS VR

  • Full Member
  • ***
  • Posts: 213
  • BHP: 5