« previous next »
Pages: [1]

Author Topic: LCD display and Round display  (Read 5572 times)

Offline kloucks

  • Jr. Member
  • **
  • Posts: 23
  • BHP: 0
LCD display and Round display
« on: May 14, 2014, 12:58:28 am »
So i have both displays and i would like to utilize both. Can i just plug the round into the DSUB9 connection and then hard wire the display into the circuit board? Or do i have to choose one or the other?  Thanks
Logged

Offline gunni

  • Hero Member
  • *****
  • Posts: 1492
  • BHP: 37
Re: LCD display and Round display
« Reply #1 on: May 14, 2014, 06:11:58 pm »
You can have both. The round is just a serial stream reciever.

Logged

Offline NOTORIOUS VR

  • Full Member
  • ***
  • Posts: 213
  • BHP: 5
Re: LCD display and Round display
« Reply #2 on: May 15, 2014, 05:36:07 pm »
As Gunni said, you can have both since they're connected two different ways.  The Round gauge uses the serial port.  The LCD is a dedicated port/header on the board.

Logged

Offline kloucks

  • Jr. Member
  • **
  • Posts: 23
  • BHP: 0
Re: LCD display and Round display
« Reply #3 on: May 20, 2014, 04:02:02 pm »
that is awesome.  VR your setup looks great.  I was just confused when I read that you cannot connect the LCD to the AIM's input, but it makes sense now. Thanks
Logged
Pages: [1]
« previous next »