Author Topic: TPS Signal Filtering ?  (Read 4698 times)

Offline Mac-B

  • Jr. Member
  • **
  • Posts: 24
  • BHP: 0
TPS Signal Filtering ?
« on: May 07, 2014, 08:46:07 am »
I found the problem with the jumping lambda signal in my Carrera install.
As i only use Alpha/n it is the TPS signal jumping, i lowered the accel enrichment and gave it a dead band at the beginning, that helped a lot.
But the TPS signal jumping by 1 LSB is allready causing a jumping in the VE table and a jumpy lambda signal as well

For the MAP sensor there are filter settings, are there filter setting available for the TPS as well ?

Greetings,
Marcus