VE table TPS stuck on 5% instead of 0

[unariciflocos]

Hi guys,

Trying to set up my car but it this is giving me such a hard time since the VE table shows the TPS to be 5% while everything else shows it as being 0.

Does anyone know how to fix it?

Thanks,
Andrei

[mattias]

Post an error report (Help menu) from within VemsTune (requires internet connection), then post the link here given to you by the program.
That way, we can see the configuration parameters, and it also tells us which firmware you're running, etc.

Suggestion: Install absolute latest VemsTune (not the stable version) and "update files manually" from the Preferences menu. Upgrade firmware to 1.2.23, and start fresh from there.

[unariciflocos]

Thanks for the quick response.

I tried running firmware 1.2.25 but it corrupted my whole config. Now I'm on 1.2.17.

http://vems.hu/vemstune/bugreports/reports.php?cmd=view&key=HbvQDR

I can't do any more testing today because I've burnt my starter motor, but while turning the engine by hand I alkso noticed that sometimes injector 1 fires on its own and after that all 4 fire as a batch. The ECU is set up for batch fire however.

[Erikk]

Set 'Alpha-N IAC Compensation' to 0.

[unariciflocos]

It worked! Thanks!