News:

When asking for technical help at the very least let us know the version of firmware you are running.
Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html

Main Menu

vems 3.1 hall sensor jumper setup

Started by mads b (dk), March 18, 2014, 02:27:52 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

mads b (dk)

March 18, 2014, 02:27:52 PM
is there anyone who can tell if this is set up for primary hall sensor ?

picture -> www.dropbox.com/s/5lrytxlz9129kc4/2013-05-23%2000.39.58.jpg

Thanks Mads
Vw beach buggy 1.6 VNT turbo, Vems 3.1 no. 57
Print
Go Up Pages1
User actions