« previous next »
Pages: [1]

Author Topic: firmware upgrade via bluetooth  (Read 4966 times)

Offline Seight-v8

  • Sr. Member
  • ****
  • Posts: 339
  • BHP: 6
    • Members Page - Scott Richmond
firmware upgrade via bluetooth
« on: February 22, 2014, 02:09:08 pm »
hello all,

Can firmware upgrade be done via Bluetooth to serial adapter, I've tried but it always hangs during the firmware upload to the ECU.

Was hoping to do away with most of the cables when using VEMS.

cheers

scott
Logged
Engine:Rover V8 4600cc
Vems Firmware:V1.2.38, GPS, SDcard, LCD & Dual lambdas, Wasted spark, 36-1 trigger, Cam Sync & Bluetooth serial.

http://www.vems.hu/wiki/index.php?page=MembersPage%2FScottRichmond
Pages: [1]
« previous next »