Author Topic: second egt  (Read 7491 times)

Offline Seight-v8

  • Sr. Member
  • ****
  • Posts: 339
  • BHP: 6
    • Members Page - Scott Richmond
second egt
« on: April 19, 2013, 08:24:40 pm »
can vems support a second egt, as I have a v8, is it worth my wiring a second egt to the other bank, while I am doing other mods in the ecu?

if I do can the firmware support/read it....or am I wasting my time.

cheers

scott
Engine:Rover V8 4600cc
Vems Firmware:V1.2.38, GPS, SDcard, LCD & Dual lambdas, Wasted spark, 36-1 trigger, Cam Sync & Bluetooth serial.

http://www.vems.hu/wiki/index.php?page=MembersPage%2FScottRichmond

Offline PeepPaadam

  • Sr. Member
  • ****
  • Posts: 250
  • BHP: 8
Re: second egt
« Reply #1 on: May 20, 2013, 12:31:46 pm »
Yes it can, I have ordered VEMS with two EGT's preassembled in the factory and it worked.

I wonder though what has to be done to connect up to 8x EGT like I read somewhere in wiki.

Offline Kamuto

  • Hero Member
  • *****
  • Posts: 814
  • BHP: 19
Re: second egt
« Reply #2 on: May 20, 2013, 02:25:06 pm »
Yes it can, I have ordered VEMS with two EGT's preassembled in the factory and it worked.

I wonder though what has to be done to connect up to 8x EGT like I read somewhere in wiki.
yes I'm interested in that too
Vems installer in Lithuania
valdas.sunokas@gmail.com

Offline PeepPaadam

  • Sr. Member
  • ****
  • Posts: 250
  • BHP: 8
Re: second egt
« Reply #3 on: May 21, 2013, 06:59:36 am »
Here's what I read in comments about firmware 1.2.11 in Firmware Changes page:

Quote
•[1.2.11] - for testing

•LCD page9 can display 4 EGT and 2 lambda
◦it seems popular now (especially in USA) to log multiple channels that v3 can do easily (some v3 ordered with 8 EGT-inputs and 2 lambda)

So it is entirely possible to use up to 8x EGT.

Offline turbols1

  • Jr. Member
  • **
  • Posts: 15
  • BHP: 0
Re: second egt
« Reply #4 on: December 17, 2013, 08:15:31 am »
Any updates on this? I would really like to know how to ad 8 inputs for egts.

Offline Kamuto

  • Hero Member
  • *****
  • Posts: 814
  • BHP: 19
Re: second egt
« Reply #5 on: December 17, 2013, 07:54:49 pm »
Any updates on this? I would really like to know how to ad 8 inputs for egts.
just use egt converters which provide 0-5v output, connect them to vems analog inputs, and set these inputs as egt :)
Vems installer in Lithuania
valdas.sunokas@gmail.com