« previous next »
Pages: 1 ... 8 9 [10]

Author Topic: N/A 4AGE 16V in AE86 - help needed, trying to "VEMS it"  (Read 151661 times)

Offline GintsK

  • Hero Member
  • *****
  • Posts: 1257
  • BHP: 50
Re: N/A 4AGE 16V in AE86 - help needed, trying to "VEMS it"
« Reply #135 on: December 26, 2011, 10:28:36 pm »
For first I suggest to measure what is voltage levels now on VSS from cluster side. And only then decide what circuitry to use.

Gints.
Logged

Offline irishtwincam

  • Full Member
  • ***
  • Posts: 199
  • BHP: 9
Re: N/A 4AGE 16V in AE86 - help needed, trying to "VEMS it"
« Reply #136 on: February 23, 2012, 09:59:21 pm »
Any update on vems controlled speedo?
Logged

Offline uzelac

  • Full Member
  • ***
  • Posts: 118
  • BHP: 4
Re: N/A 4AGE 16V in AE86 - help needed, trying to "VEMS it"
« Reply #137 on: February 24, 2012, 08:02:53 am »
We are rebuilding engine, cams and stuff, so VEMS is on hold.
Will let you know when i, again, get to that point :).

Sasa
Logged
N/A 4AGE 16V - 180hp@8000rpm - work in progress :)

Offline irishtwincam

  • Full Member
  • ***
  • Posts: 199
  • BHP: 9
Re: N/A 4AGE 16V in AE86 - help needed, trying to "VEMS it"
« Reply #138 on: May 26, 2012, 06:30:08 pm »
any updates?
Logged

Offline uzelac

  • Full Member
  • ***
  • Posts: 118
  • BHP: 4
Re: N/A 4AGE 16V in AE86 - help needed, trying to "VEMS it"
« Reply #139 on: September 03, 2012, 02:56:47 am »
Huh... after months of work on car (bodywork, cage, electrics), we droped the engine sometimes in July and started it few days ago.
It fired like a champ, i didn't even have my PC with me, it cranked for a minut and than bam :).
Two more cranks, two more easy starts so I figure that's it.

Need to fix few more things, but i believe i will drive the car next week, can't wait! :)
It's been some 9 months since i've driven my AE86, huh, too long :)

At the moment:


Haven't tried speedo and tacho booster setups, will know if that works as soon as i drive it a bit :)

Regards
Logged
N/A 4AGE 16V - 180hp@8000rpm - work in progress :)

Offline irishtwincam

  • Full Member
  • ***
  • Posts: 199
  • BHP: 9
Re: N/A 4AGE 16V in AE86 - help needed, trying to "VEMS it"
« Reply #140 on: September 03, 2012, 06:27:02 pm »
Awesome!
Logged

Offline DANLOLASDAD

  • Jr. Member
  • **
  • Posts: 22
  • BHP: 3
Re: N/A 4AGE 16V in AE86 - help needed, trying to "VEMS it"
« Reply #141 on: September 08, 2012, 12:40:53 am »
nice one ;D
Logged

Offline uzelac

  • Full Member
  • ***
  • Posts: 118
  • BHP: 4
Re: N/A 4AGE 16V in AE86 - help needed, trying to "VEMS it"
« Reply #142 on: November 25, 2013, 02:27:12 pm »
Forum just warned me if I'm sure i want to post in this topic since it was 120 days since last post :).

Lot of things happen to me and the car, but last few months were busy for two of us.
Some things got changed, some improved and many removed :)

Anyway, it should (can't say ano more that it will) be over in 5-10 days since i promised i will not start any change/part until car starts and i get to drive it again.

ATM it fires and looks like this
http://www.youtube.com/watch?v=IPZCQZcr-74&feature=youtu.be

Thank you all for support

p.s. DAN, i managed to get that tacho working :)
Logged
N/A 4AGE 16V - 180hp@8000rpm - work in progress :)

Offline DANLOLASDAD

  • Jr. Member
  • **
  • Posts: 22
  • BHP: 3
Re: N/A 4AGE 16V in AE86 - help needed, trying to "VEMS it"
« Reply #143 on: December 13, 2013, 03:28:46 pm »
Well Done keep it up  ;)
Logged

Offline uzelac

  • Full Member
  • ***
  • Posts: 118
  • BHP: 4
Re: N/A 4AGE 16V in AE86 - help needed, trying to "VEMS it"
« Reply #144 on: December 13, 2013, 07:51:40 pm »
« Last Edit: December 13, 2013, 07:55:12 pm by uzelac »
Logged
N/A 4AGE 16V - 180hp@8000rpm - work in progress :)
Pages: 1 ... 8 9 [10]
« previous next »