News:

New Users: Send [email protected] an email with your account name. I've turned off auto-approve to reduce the 100 new spam accounts a day. Thanks, -Jason

Main Menu

has my vems died

Started by Seight-v8, September 13, 2013, 04:44:07 PM

Previous topic - Next topic

Seight-v8

hello all,

So my vems was running fine, engine was idling in the garage, it went really lumpy and the engine cutout.

now no vems, no lcd, no fuel pump and engine wont start.

Disconnected everything and tried a few times, but nothing, all fuses ok in the wiring, and everything else in the car is fine...

Anyone point me where to go next.

thanks

scott
Engine:Rover V8 4600cc
Vems Firmware:V1.2.38, GPS, SDcard, LCD & Dual lambdas, Wasted spark, 36-1 trigger, Cam Sync & Bluetooth serial.

http://www.vems.hu/wiki/index.php?page=MembersPage%2FScottRichmond

gunni

12v to the ecu is there?
all grounds are there?
no bad smell of the ecu?

Seight-v8

yes found the problem was a loose connection on the inside of the car loom fuse box to one of the fuses....now my vems is working again.

Always the simple ones that are the hardest to find.....just hope it doesn't happen while I am driving the car.

cheers

scott
Engine:Rover V8 4600cc
Vems Firmware:V1.2.38, GPS, SDcard, LCD & Dual lambdas, Wasted spark, 36-1 trigger, Cam Sync & Bluetooth serial.

http://www.vems.hu/wiki/index.php?page=MembersPage%2FScottRichmond