News:

When asking for technical help at the very least let us know the version of firmware you are running.
Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html

Main Menu

Play Trigger 30-2 wheel

Started by KWest, September 12, 2013, 09:51:21 PM

Previous topic - Next topic

KWest

Hey everyone,
  My Aprilia V-twin uses a 30-2 trigger wheel and I'll looking to bench test the VEMS along side the stock ECU by supplying them the same inputs and comparing the outputs with my scope/logic analyzer. Is it possible to have play trigger emulate a 30-2 wheel?

Thanks in advance.

GintsK

Vemstune offer to save triggerlog to sound file. Afterwards you can edit it and play in loop.
But I also used Goldwave programm to create such files from zero. Probably Audacity is sutable too (free).

KWest

Thanks for the reply.
  I have used CrankWheelPulser by B&G before to generate .wav files that play in a loop, however the option to do fixed rate sweeps and then hold an RPM in vemstune is exactly what I'm looking for. Also the the second channel output set to 0deg will let me trigger my scope and logic probe perfectly to compare ECU outputs.