Author Topic: 1.2.13 misfire/stumble  (Read 5558 times)

Offline Denmark

  • Hero Member
  • *****
  • Posts: 542
  • BHP: 7
1.2.13 misfire/stumble
« on: July 14, 2013, 05:01:53 pm »
Hi,

Have Any of you guys had stumble/misfire problems with 1.2.13 firmware

I seem to have a random stumble like a really short fuelcut, that Cuts all power for a really short time , seems to do it at random rpms
I have only had it during Cruise

Thanks
Skassa
« Last Edit: July 14, 2013, 06:26:10 pm by Denmark »
working on the boxer

Offline Denmark

  • Hero Member
  • *****
  • Posts: 542
  • BHP: 7
Re: 1.2.13 misfire/stumble
« Reply #1 on: July 14, 2013, 07:49:09 pm »
I have just been checking the last log of the sdcard, and have found the problem,
its the speed signal that goes to zero for a very short time, so the launchcontrol activates,

I do belive that its a firmware glitch that does this, as i loaded 1.2.11 firmware into a car that have been running for years , and this also have the stumble now,
 But that car is 400km from me, and my subaru cant run any older firmware then 1.2.13 , so i will just disable launchcontrol on mine,
but my other customer uses launchcontrol for 1/4 mile racing, so i will have to find a solution for this problem.


Thanks,
Skassa
working on the boxer