Author Topic: config parameter missing in VT, generating validate error  (Read 5510 times)

Offline Mads Lund

  • Jr. Member
  • **
  • Posts: 61
  • BHP: 4
    • VEMS member
config parameter missing in VT, generating validate error
« on: July 20, 2013, 07:37:56 pm »
Hi, just finished installing and configuring my VEMS

but one unsolvable problem exist:
in VemsTune do I miss the "2/4 stroke" parameter in the engine setup dialog. The config file is set to "2 stroke" and when I validate the config, do I recieve an error "don't use 2 stroke mode"

Is there a way of editing the config file in a text editor to change that parameter, or any other work around ?

I did ofcause upgrade both firmware and vemstune (config 1.2.11   VT 1.5.3)

Br Mads