Author Topic: Avcs/vvti/vanos control problem  (Read 8177 times)

Offline Denmark

  • Hero Member
  • *****
  • Posts: 542
  • BHP: 7
Avcs/vvti/vanos control problem
« on: May 11, 2013, 04:52:08 pm »
Hi all,

Any inputs to get this subaru running right

http://www.vems.hu/wiki/index.php?page=SubaruEj


Thanks
Skassa
working on the boxer

Offline peter_jensen

  • Jr. Member
  • **
  • Posts: 68
  • BHP: 5
  • Vems sins 2004
Re: Avcs/vvti/vanos control problem
« Reply #1 on: May 12, 2013, 09:47:35 pm »
I do not think any people can help you on this forum as you are the first in the world that have this setup. Wait for development team to test your settings.

Peter 

Offline Denmark

  • Hero Member
  • *****
  • Posts: 542
  • BHP: 7
Re: Avcs/vvti/vanos control problem
« Reply #2 on: May 13, 2013, 09:46:31 am »
And a new problem have allready arrived ,
I now have a costumer who have a 07' wrx with avcs, but that run the trigger setup with a 36-2-2 on the crank , and a Hall sensor on each inletcam that each have a 4-1 trigger :)

working on the boxer

Offline peter_jensen

  • Jr. Member
  • **
  • Posts: 68
  • BHP: 5
  • Vems sins 2004
Re: Avcs/vvti/vanos control problem
« Reply #3 on: May 14, 2013, 10:53:33 pm »
This is not a problem this is just more work :-) Subaru is a neverending story. Dual AVCS is now working using 4 trigger inputs.
Link to your nice car http://www.youtube.com/watch?v=E6KgZdKDGIo

Peter
« Last Edit: May 14, 2013, 10:58:41 pm by peter_jensen »

Offline Erikk

  • Jr. Member
  • **
  • Posts: 95
  • BHP: 7
Re: Avcs/vvti/vanos control problem
« Reply #4 on: May 16, 2013, 06:37:20 pm »
And a new problem have allready arrived ,
I now have a costumer who have a 07' wrx with avcs, but that run the trigger setup with a 36-2-2 on the crank , and a Hall sensor on each inletcam that each have a 4-1 trigger :)


I have a few 2006 Subaru wrx coming up soon, i havent gotten into any research yet. Do they also run the same trigger as 2007 ?
Sweden - erik.englund@gmail.com

Offline Denmark

  • Hero Member
  • *****
  • Posts: 542
  • BHP: 7
Re: Avcs/vvti/vanos control problem
« Reply #5 on: May 19, 2013, 05:51:45 pm »
Yes if its the hawkeye model it runs 36-2-2-2 , and avcs on the inlet cams,
Vr crank , Hall 4-1 on both cams were the left is also used for secondary trigger,

This setup i belive dosent work yet , but belive its a easy fix :) ,

The do also run a electronic throttle , this is also not controleble,
I plan in using a wire throttlebody instead


Regards
Skassa
working on the boxer