Conflicted channel.

[chencho16000]

Hi guys.
My vems has 4 igbt and 4 logic outputs.
Total 8 injector outputs.
4 outputs for use injectors.
And the other two for the solenoid valve control and boost control.
  I wonder where the operating channel is assigned by injector settings or misc.
I ask this question because when I assign settings injector by an error, a conflict with the channel appears.
   Can you help me?
Thank you very much.

[jrussell]

Submit a Vems Sharing Center report (Help -> Vems Sharing Center -> Create a new report) and make sure your .vemsconfig is included in the report. Then paste the URL here and we can more easily help you out.

Outputs -> Assign Output Channels should highlight any conflicts you may have and allow you to solve them.