removing igbt and bridging for TTL

[njorge0319]

i need to remove my igbts for ch0,1,2,and3
heres a pic of the bottom of the board i found,
i need to remove the IGBT chip and replace it with a bridge between the center pin and the output pin to make it TTL/active coil compatible.
soo which fets do i remove and what pins should i bridge? what do i bridge them with?

[GintsK]

:)

http://www.vems.hu/files/GergelyLezsak/v35pics/15_FETS.jpg