News:

When asking for technical help at the very least let us know the version of firmware you are running.
Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html

Main Menu

VW 1.8t passive throttle idle control

Started by njorge0319, December 25, 2012, 01:56:02 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

njorge0319

December 25, 2012, 01:56:02 AM
Anyone have experience setting up a VW throttle body and wiring the motor to control the idle?
Wired Pin1 12vswitched and pin2 inj ch5 output.
I was reading a vems wiki and saw something about using a in4007 diode?

Do I need to setup some kind of tps switch? If so how..

The tb has a motor an idle switch, idle tps, regular tps

Any input is appreciated 
Print
Go Up Pages1
User actions