« previous next »
Pages: [1]

Author Topic: Round WBO2 EGT calibration problem  (Read 6440 times)

Offline kimmoz28

  • New Users
  • *
  • Posts: 1
  • BHP: 0
Round WBO2 EGT calibration problem
« on: October 11, 2012, 08:59:59 pm »
I have Vems wideband but i have problems with calibration. Wideband show 18.9 in free air so its have to calibrate, but WB02 calibration button is "grey" in vemstune and cant press it. Connection with vemstune and wideband working and i can update firmware.
Logged

Offline gunni

  • Hero Member
  • *****
  • Posts: 1492
  • BHP: 37
Re: Round WBO2 EGT calibration problem
« Reply #1 on: October 11, 2012, 09:12:15 pm »
You don´t need to calibrate the VEMS wideband gauge for the sensor, it reads the sensors resistor to do so automatically.
Logged

Offline rob@vems.co.uk

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: Round WBO2 EGT calibration problem
« Reply #2 on: October 13, 2012, 09:37:24 am »
If the sensor is used then it will never free air calibrate properly as it now contains unburnt fuel which will skew the "free-air" reading
Logged
Pages: [1]
« previous next »